Welcome to the fifth installment of common misconceptions about spring products. Many designers of coil springs just put placeholders in springs data. Read on as we discuss!
Index Design Theory and Definition
There is a direct correlation between wire size and the ID/OD (index) that affects the ability to coil on modern-day equipment. The index of spring is the relationship between the mean coil diameter (MD) and the wire size(WS). The mean wire diameter is the center of the coil body which is:
(MD = OD – WD) or (MD = ID + WD)
The index is the Mean coil diameter (MD) divided by the wire diameter.
For Example:
(Index = MD / WD)
(0.500” (MD) / 0.040” (WD) = Index of 12.5)
- Spring Index: 0 – 3.9: almost impossible to manufacture (ugly)
- Spring Index = 4 – 5: Difficult but not impossible (bad)
- Spring Index = 6-12: Best Range (good)
- Spring Index = 13 – 15: Above Best by not Difficult (a little bad)
- Spring Index = 15 – 25: Difficult (bad)
- Spring Index = > 25: difficult to manufacture (ugly) tolerances are larger
What does this mean in layman’s terms? The index has a direct impact on the ability to hold tolerances on key dimensions in the spring product.
- (ID, OD) on all coil springs (compression, torsion, and extension)
- Free Length on compression springs and extension springs
- Torsion Spring Leg relationships
- Hook relationships on extension springs
This means higher cost, and possibly a situation where the spring can’t be manufactured. Also with difficult and ugly springs, the cost is driven up just by the spring rate, and the ability to hold tolerances. Let Apex Spring and Stamping design and make those calculations work for you. We are experts in spring designs and we can lead you to a better and more cost-effective solution.
How can we help? Contact us today!
| Contact Us | Request A Quote |
Related
Engineering
11.19
Entangled Parts: What a Mess!
Entangled Parts: What a Mess!
Many springs will tangle on their own. But with our experience we can assist with design and guide you through the process to give you the best options for manufacturing, materials, and processes. We have looked at millions of parts just like yours. Let us help you get, untangled!
Manufacturing
10.15
Local Manufacturers Are The Best Choice
Local Manufacturers Are The Best Choice
There is no doubt that working local businesses has benefits in every industry. But what about manufacturing? Well, there are great benefits to working locally in manufacturing. We’d like to dig into those benefits so you can continue to make informed decisions for your business.
Materials
09.16
Materials Used for Wire Form Manufacturing
Materials Used for Wire Form Manufacturing
As with all aspects of industrial products, the materials used to produce wire forms have to be carefully considered when making a selection. They also must be of the highest quality and durable enough to withstand the stress of constant use in their intended application. Let’s take a closer look at each of these material and how they are considered for wire forming projects.